• 3
  • 2
  • 1
NewsCurrent position:index > News

Aluminium alloy typical use

Release:shenghaolvye Browse:1406次

1050 food, chemical and brewing industry with extruded coil, a variety of hoses, fireworks powder

1060 requires that the resistance and the forming of high, but the intensity is not high, chemical equipment is its typical use

1100 for processing requires good formability and high corrosion resistance but is not required to have high strength parts, such as chemical products, food industry device and storage containers, sheet processing, deep drawing or spinning concave ware, welding parts, heat exchanger, printing plate, nameplate, reflective instruments

1145 packaging and insulation aluminum foil, heat exchanger

1199 electrolytic capacitor foil, optical reflective film

1350 wire, conductive wire, busbar, transformer and strip

2011 screws and mechanical products with good cutting performance.

2014 occasions where high strength and hardness (including high temperature) is applied to the application. Aircraft heavy, forging, thick plate and extrusion materials, wheel and structural components, multistage rocket first stage fuel tank and spacecraft parts, truck frame and suspension system parts

2017 is the first to obtain industrial application of the 2XXX system, the current application range is narrow, mainly for rivets, general mechanical parts, structure and transport structure parts, screw and accessories

2024 aircraft structure, rivets, missile components, truck wheels, propeller components and other structural parts

2036 auto body sheet metal parts

2048 aircraft structure parts and weapon structure

2124 aircraft structure parts

2218 aircraft engine and diesel engine piston, the engine cylinder head, jet engine impeller and compressor ring

2219 space rocket welding oxidant, supersonic aircraft skin and structure parts, working temperature is -270~300. Good welding, high fracture toughness, T8 state has a high resistance to stress corrosion cracking

2319 welding electrode and filler metal for welding 2219

2618 die forgings and free forgings. Piston and aero engine parts

2A01 working temperature less than or equal to 100

Axial compressor blade of turbine jet engine at 2A02 operating temperature 200~300

The structure of the aircraft structure and working temperature of 125~250, 2A06, 150~250

2A10 strength is higher than that of 2A01 alloy, and the structure of the aircraft structure is less than or equal to 100.

Medium strength structure, propeller blades, transportation vehicles, and building structures of 2A11 aircraft. Medium strength bolts and rivets for aircraft

2A12 aircraft skin, frame, wing, wing, wing, rivet, etc., building and transportation vehicles

Free forging and die forging of complex 2A14

2A16 working temperature 250~300 for aerospace aircraft parts, working at room temperature and high temperature, welding vessel and air tight 2A17 working temperature 225~250

2A50 shape complex medium strength parts

2A60 aircraft engine compressor wheel, guide wheel, fan, impeller, etc.

2A70 aircraft skin, aircraft engine piston, air guide wheel, wheel, etc.

2A80 aero engine compressor blade, impeller, piston, high ring and other parts of the work temperature

2A90 aero engine piston

3003 parts, which are used for machining, have good formability, high resistance to corrosion, and can be used for the work of high strength, such as kitchen, food and chemical products processing and storage device, the tank, tank, and the pressure vessel and pipeline of thin plate processing.

3004 aluminum cans cans, require a higher strength than the 3003 alloy parts, chemical products production and storage device, sheet processing, construction parts, construction tools, all kinds of lighting components

The 3105 room partition, baffle, movable house board, gutter and downspout processing parts, sheet metal forming, bottle cap, bottle stopper

3A21 aircraft fuel tank, oil pipe, rivet wire, etc., building materials and food and other industrial equipment, etc.

5005 similar to 3003 alloys with moderate strength and good corrosion resistance. Used as a conductor, cooking utensils, instrument panel, shell and building decoration. The oxide film on the anodic oxide film is brighter than that of the 3003 alloy, and it is in harmony with the tone of the 6063 alloy.

The 5050 sheet can be used as lining plate of refrigerator and refrigerator, automobile pipe, tubing and agricultural irrigation pipe; also can be processed plate, pipe, bar, wire and other special-shaped material and 5052 alloy has good forming performance, corrosion resistance, fatigue strength, candle with moderate static strength, used in the manufacture of aircraft fuel tank, oil pipe, and the vehicle and vessel sheet metal parts, instruments, lights frame and rivet, metal products

5056 magnesium alloy and cable sheath rivets, zippers, nails; aluminum wire is widely used in the processing of agricultural insect trap cover, and the need for other applications where high corrosion resistance

5083 for the need to have high corrosion resistance, good weldability and medium strength welding occasions, such as ships, cars and aircraft panels; need strict fireproof pressure container, cooling device, television tower, drilling equipment, transportation equipment, missile component and armor

5086 used in the need of high resistance to corrosion, good resistance and medium strength, such as ships, automobiles, aircraft, low temperature equipment, television tower, drilling equipment, transportation equipment, missile parts and decks, etc.

5154 welding structure, storage tank, pressure vessel, ship structure and marine facilities, transportation tank

5182 cans used for processing sheet cover, car plate, control panel, reinforcement, bracket and other parts

5252 used in the manufacture of high strength of the decorative parts, such as automobile and other decorative parts. Having a bright and transparent oxide film on the surface of the anode

5356 aluminum magnesium alloy welding rod and welding wire with the welding magnesium content greater than 3%

5454 welding structure, pressure vessel, marine installation pipeline

5456 armor plate, high strength welding structure, storage tank, pressure vessel, ship material

5457 decorative parts of automobile and other equipment which is treated by polishing and anodic oxidation

5652 hydrogen peroxide and other chemical products storage containers

5657 decorative parts of the vehicle and other equipment which are treated by the polishing and anodic oxidation, but in any case, the material has a fine grain structure.

5A02 aircraft fuel tank and pipe, welding wire, rivet, ship structure

5A03 medium strength welded structure, cold stamping parts, welded vessel, welding wire, can be used instead of 5A02 alloy

5A05 welding structure, aircraft skin skeleton

5A06 welding structure, cold die forging parts, welding pull vessel parts, aircraft skin bone parts

5A12 welded structure, bulletproof deck

6005 extrusion profiles and tubes, used for the requirements of the structure of higher than 6063 alloy, such as ladder, TV antenna, etc.

6009 car body panels

6010 sheet: car body

6061 requires a certain strength, can be welded with the high resistance of various industrial structure, such as the manufacture of truck, tower building, ship, electric car, fixture, mechanical parts, precision machining and other pipe, rod, shaped material, plate

The 6063 building materials, irrigation pipe and extrusion materials for vehicles, bench, furniture, fences etc. with the

6066 forging and welding structure extrusion materials

6070 heavy duty welding structure and extrusion materials and tubes for automobile industry

6101 bus with high strength bar, electric conductor and heat dissipation equipment, etc.

6151 for the die forging crankshaft parts, machine parts and production rolling ring, for both have good performance, high strength, but also have good corrosion resistance

6201 high strength conducting bar and wire rod

The extrusion plate, 6205 pedal and high impact

6262 a high stress component that requires an anti - corrosion performance of 2011 and 2017 alloys

6351 the extrusion structure, water, oil, etc.

6463 construction and various apparatus profiles, as well as by the anodic oxidation of the bright surface of the car decoration

6A02 aircraft engine parts, shape complex forgings and die forgings

7005 extrusion material, welding structure for manufacturing not only have high strength and high fracture toughness, such as transport vehicles, truss rod, container; large heat exchanger, and after welding can not be solid melt processing components; also can be used in the manufacture of sports equipment such as tennis racket and baseball bat

7039 refrigerated containers, cryogenic equipment and storage tanks, fire pressure equipment, military equipment, armor plate, missile equipment

7049 for the same and static strength and forging of 7079-T6 alloy has high resistance to stress corrosion cracking strength of the parts, such as aircraft and missile parts, landing gear and hydraulic cylinder extrusion. The fatigue properties of the parts are approximately equal to that of the 7075-T6 alloy, while the toughness is slightly higher.

7050 aircraft structural parts with medium plate, extrusion, free forging and die forging. The requirements for manufacturing the parts of this type are: anti stripping corrosion, stress corrosion cracking, fracture toughness and fatigue resistance

7072 aluminum foil and special thin strip, 2219, 3003, 3004, 5050, 5052, 5154, 6061, 7075, 7475, 7178, alloy sheets and tubes

7075 is used in the manufacture of aircraft structure and futures he requires high strength, corrosion resistance, high stress structure parts, mold manufacturing

7175 high strength structure used for forging aircraft. T736 materials have good comprehensive properties, that is, the strength, the anti stripping corrosion and the stress corrosion cracking performance, fracture toughness, fatigue strength are high

7178 parts with high compressive strength and high yield strength for the manufacture of aviation aircraft

7475 with and without aluminum fuselage aluminum sheet, wing skeleton, stringers etc.. Other parts with high strength and high fracture toughness.

7A04 aircraft, screw, and the stress components such as beams, girders, frame wing rib and landing gear etc.

友情链接:苹果彩票  苹果彩票  苹果彩票网  苹果彩票  苹果彩票  苹果彩票网  苹果彩票  苹果彩票  苹果彩票  苹果彩票网  
苹果彩票网苹果彩票ywt-auto.com 苹果彩票开奖

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!